2026 Cost

Paver Cost in Delaware: $9–$53 / sq ft

5% above the national average · Free instant calculator below, no signup

Paver Cost in Delaware

In Delaware, paver costs are approximately 5% above the national average. Coastal weather and moderate labor costs. Run the calculator below for a Delaware-adjusted estimate.

Updated May 2026Reviewed by CostPerProject Editorial Team

Project Dimensions

-

Estimated Project Cost

Enter your project dimensions above to see your estimate.

Paver Cost in Delaware: What to expect

Delaware (DE) is in the Mid-Atlantic region. Home improvement costs here are approximately 5% above the national average due to local labor rates, material availability, and regional demand.

Coastal weather and moderate labor costs.

Average paver rates in Delaware

TypeDelawareNational Avg
Concrete Pavers$9.45 – $23.10 / sq ft$9.00 – $22.00 / sq ft
Brick Pavers$12.60 – $29.40 / sq ft$12.00 – $28.00 / sq ft
Natural Stone$16.80 – $52.50 / sq ft$16.00 – $50.00 / sq ft
Permeable Pavers$15.75 – $36.75 / sq ft$15.00 – $35.00 / sq ft

Paver Cost in major Delaware cities

Costs do vary between metros and rural areas, but we only publish a figure we can source. Within-state variation is driven by local labor markets that do not track city size reliably, so we apply the Delaware state rate across the cities below rather than estimating a premium we cannot verify. For a figure specific to your job, use the calculator above.

Wilmington

$9.45 – $52.50 / sq ft

Delaware state rate

Dover

$9.45 – $52.50 / sq ft

Delaware state rate

Newark

$9.45 – $52.50 / sq ft

Delaware state rate

Why paver costs differ in Delaware

The Delaware multiplier reflects three things: prevailing wages for skilled trade labor, material delivery cost from regional suppliers, and any state or municipal permitting overhead. Compared to neighboring states, Delaware sits 5% above the national average.

StateCost vs national average
Delaware (this page)5% above the national average
Maryland11% above the national average
New Jersey21% above the national average
Pennsylvania1% below the national average

Permits and timing in Delaware

Permits in Delaware

Delaware cities and counties require permits for roofing, driveway paving, and major exterior work. Tree removal on private property is largely unregulated outside of conservation easements and coastal flood zones. Always confirm with your local building or planning office before a major project.

Best time of year for paver in Delaware

Spring through early fall when the ground isn't frozen; avoid extreme heat for installer comfort and proper polymeric sand setting.

Paver Cost FAQs for Delaware

Common questions about paver cost, permits, and timing in Delaware.

How much does paver cost in Delaware?

Paver Cost in Delaware typically costs $9.45–$52.5, which is 5% above the national average. Final pricing depends on paver material, pattern complexity, how much base preparation the site needs, and access.

Does paver cost more in Wilmington?

Not by a figure we can source. Quotes in Wilmington generally track the Delaware rate shown here. Within-state differences are driven by local labor markets rather than by city size, so we do not publish a separate Wilmington premium. Getting two or three local quotes is the reliable way to see where your job lands.

Do I need a permit for paver installation in Delaware?

Delaware cities and counties require permits for roofing, driveway paving, and major exterior work. Tree removal on private property is largely unregulated outside of conservation easements and coastal flood zones. Always confirm with your local building or planning office before a major project.

When is the best time of year for paver in Delaware?

Spring through early fall when the ground isn't frozen; avoid extreme heat for installer comfort and proper polymeric sand setting.

How do paver costs in Delaware compare to neighboring states?

Delaware sits 5% above the national average for paver. Compared to neighboring states: Maryland runs about 6% higher, New Jersey runs about 16% higher, Pennsylvania runs about 6% lower.

Why is paver more expensive in Delaware?

Coastal weather and moderate labor costs. Combined with regional labor rates and material logistics, Delaware sits 5% above the national average for paver.

More calculators for Delaware

Related Calculators